JCR Step Beam To Bracket Auto Welding Machine

JCR Step Beam to Bracket Auto Welding Machine

(2 sides welding in one end)

The step beam to bracket auto welding machine is mainly used for welding between the pallet racking step beam and the bracket/ end connector, the welding guns controlled by servo motor, machine with double working station and two rotating device. It can weld 150-180beams/hour. It also equipped with Line curtain safety device / photography protection bar.

1. 1. Step beam to bracket/ end connector auto welding machine main technical parameter:

1. Machine dimension size: 7000mmx1200mmx2000mm (LxWxH)
2. Machine weight: about 2200kgs
3. Beam welding capacity: 800-4300mm(beam length), 50-200mm(beam height), 40-70mm(beam width)
4. Welding speed: about 160-180 beams/ hour
5. Welding beam thickness:1.0-2.5MM
6. Material of beam and bracket: carbon steel
7. Welding gap: 0-2.5mm
8. Welding sides: 2 sides welding in one end, total is 4 sides welding

9. Welders: 4 sets ( MODEL: YD-280RK,  PANASONIC, JAPAN)

10. Wire feeders: 4 sets
11. Welding guns: 4 pcs  (Brand: ABICORBINZEL EUROPEAN)

12. Rotating device: 1 set
13. Clamping device (air cylinder: AirTAC, Taiwan): 2 pcs

12. Air pushing device: to push the beam after finish welding. (Air cylinder: AirTAC, Taiwan)
13. Welding shields to protect operators
14. Heat resistant covers over linear slides
15. Weaving welding device
16. The height from the bottom of the beam to the floor is: 1000mm.
17. Line curtain safety device / photography protection bar (2PCS)

12. one quick start and emergency stop device.

2. 2. Main Electrical parameters:

1. PLC: 1 set(Mitsubishi, Japan )
2. Touch screen: 2 sets(Mitsubishi, Japan), one is fixed on the machine, one is movable, more convenience in operation.  
3. Servo motor: 6 sets(Mitsubishi, Japan)
4. Reducer: 2 sets
5. Solenoid valve and relevant electric components (Omron or equal brands)
6. Power Supply: 460V, 60Hz, 3Ph (including a transformer)

4. 3. Finished welded product photo: