JCR Steel Pallet Plate Roll Forming Line
JCR Steel Pallet Plate Roll Forming Line
1. The steel pallet profile roll forming machine is mainly used for galvanized steel iron pallet mass production by roll forming automatically, with auto cutting and PLC touch screen for control system. The whole production line is composed of decoiler, roll forming machine, run out table and electrical control panel. Etc.
2. Steel Pallet plate Roll forming line Production flow:
Decoiler – roll forming machine—cut-off—run out table
2.Galvanized steel iron pallet plate Profile drawing:
Material thickness: 1.0mm
3.Steel pallet plate profile roll forming line main technical parameter:
1) Composition
1.1) Manual Decoiler 2000kgs weight capacity 1 set
1.2) Roll forming machine 14 Nos,
1.3) Straightening device: 1 set
1.4) Cut-off: hydraulic cut-off 1set
1.5) Central electrical control: touch screen 1set
1.6) Run out table 2m 1set
2) Electrical control system
2.1) drive motor:11kw , hydraulic motor: 5.5 kw
2.2)Transmission speed reducer: 14 Nos, 80# rate:1:30.
2.3)Touch screen: Delta,Taiwan 7 inch.
2.5) Frequency convert: Delta, 11kw
2.6)Contactor: Schneider
2.7) Encoder: Omron, 1000 pulse,
2.8)Power supply: 415V 50Hz
2.9)Solenoid valve: Beijing brand
2.10) Cooling: wind cooling type.
3) Roll forming roller
3.1)Material: Cr12mov, vacuum heat treatment 58-60℃, accurate grinding hard chroming and polish. And with “Cr12MOV” marked on the roller.
3.2)Main shaft: material:40Cr, tempering, finish turning and grinding.
4) Machine body
4.1)It is welding by steel plate, main arch thickness:40mm.
4.2) Bottom plate thickness: 25mm, Arch structure plate: casting steel with painting.
4.3) Roll forming speed: 30-40m/min
4.4) Incoming coil width: 0.7-1.0mm G.I steel
4.5) linear guiding rail and ball screw: TBI, Taiwan brand
4.6) Bearing: HRB6207
4.7) Machine size: 6800*1100*1100MM, weight: about 5200kgs, it need 1x40 feet container.
