JCR Box Beam to End Connector Auto Welding Machine
JCR Box Beam with End Connector Auto Welding Machine
(4 sides welding in one end)
The box beam with end connector auto welding machine is mainly used for welding between box beam and the end connector automatically in the pallet racking system, the welding guns controlled by servo motor, machine with double working station and two rotating device. It can weld 150-180beams/hour. It also equipped with Line curtain safety device / photography protection bar.
1.Main technical parameter of rack box beam to bracket welding machine :
Machine dimension size: 7000mmx1200mmx2000mm (LxWxH)
Machine weight: about 2200kgs
Beam welding capacity: 800-4300mm(beam length), 50-200mm(beam height), 40-70mm(beam width)
Welding speed: about 120-140 beams/ hour
Welding beam thickness:1.0-2.5MM
Material of beam and bracket: carbon steel
Welding gap: 0-2.5mm
Welding sides: 4 sides welding in one end, total is 8 sides welding
Welders: 4 sets ( MODEL: YD-280RK, PANASONIC, JAPAN)
Wire feeders: 4 sets
Welding guns: 4 pcs
Welding wire: 0.8mm/ 1.0mm
Manipulator: 4 sets (individual controlled by PLC)
Clamping device (air cylinder: AirTAC, Taiwan): 2 sets
Main flip jig system: 1set
Sub flip jig systems: 2 sets
Air pushing device: to push the beam after finish welding. (Air cylinder: AirTAC, Taiwan)
Welding shields to protect operators
Heat resistant covers over linear slides
Weaving welding device
The height from the bottom of the beam to the floor is: 1000mm.
Line curtain safety device / photography protection bar ( 2pcs)
one quick start and emergency stop device.
2.Main Electrical parameters:
PLC: 1 set(Mitsubishi, Japan )
Touch screen: 2 sets(Mitsubishi, Japan), one is fixed on the machine, one is movable, more convenience in operation.
Servo motor: 10 sets(Mitsubishi, Japan)
Speed Reducer: 6 sets
Solenoid valve and relevant electric components (Omron or equal brands)
Power Supply: 380V, 50Hz, 3Ph (including one transformer)
3.Finished welded product photo:
