JCR Complete Set Steel Drum Production Machine

JCR Complete Set Steel Drum/ Steel barrel Production Machines 

 

The steel drum/ steel barrel production machines are mainly used for making steel drum/ steel barrel step by step, non-automatically, it is easy operation and suitable for small companies, who don’t need to invest big money. The complete production process is including the following machines: 3-roller bending machine, spot welding machine, seam welding machine, flanging machine, Corrugating machine for “w” breading, covering punching machine(160ton power press) and mould, glue-injection machine, seaming machine, leakage testing machine. Etc.

 

1. Steel oil drum/ steel barrel production Process:

 

1)Steel Drum/ steel barrel body making

Rolling round → Spot Welding →  Seam Welding  → Flanging → “W” Beading   → Top/ bottom cover seaming  → Leakage Checking  → Finished drum/ barrel

 

2)Steel Drum/ steel barrel cover making

Top/ bottom cover punching →Cover edge flanging and glue inject→ Cover Oil hole/ air hole punching

 

2.Steel oil drum/ steel barrel production machine introduction:

1) Circle bending      3-Roller bending machine   1set,

Manual feeding metal sheet, the roller driven by 3kw motor, to bend the sheet into a circle for drum body. Bending thickness: 0.5-1.0, width: 1000. Working Circle diameter: 300-900mm.

Machine dimension size: 1.3mx0.6mx1.1m 

2) Connection of rounded parts of the drum  Spot welding machine   1set ,

Manual feeding the round part (after 3-roller bending machine).

Electric motor: 4kw

Working diameter: 300-900mm (circle)

Machine dimension size: 1.6mx0.6mx.1.7m

3) Seam welding the body of the drum  Seam welding machine  1set

Manual feeding the circle drum body (after spot welding)

Electric motor: 160kw

Working circle diameter: 300-900mm

Size: 1.7mx0.8mx2.2m

4) Making flange in two ends of the drum body.  Double-head flanging machine 1set .

Manual feeding the drum body(after seam welding) 

Working by hydraulic

Hydraulic pump motor: 7.5kw

Working circle diameter: 200-700mm 

5) “W” beading on the drums body in two ends          Corrugating machine 1set

Manual feeding, the machine makes the corrugate on the drums body from the two ends of drums body at the same time. Two rolls extend to the drum body inner and out at the same time to form the corrugate, the roller is driven by the motor.

Working diameter: 400-700mm

Hydraulic pump motor: 4kw

Corrugating motor: 4kw (2sets)

Machine dimension size: 3.2mx0.8mx1.2m

6) Drum cover making   (Note: offer 1 set mould only, It need 160ton power press)

To punch the top and bottom cover, manual feeding the metal sheet.

 

7) Making two holes on the cover and fix two nozzles in the two holes (Note: offer 1 set combine mould only, It need 100ton power press)

1 set combine mould

Manual feeding the cover and the nozzles.

8) Glue- injection   Glue injection machine 1set,

Manual feeding the cover, to inject the glue inside the bottom cover, increase the precision, in case of leakage.

9) Seam the two covers on the drum body      Seaming machine 1set

To put the drum cover and bottom on the loading stand by manual, with drum body auto load press and seam the drums. Double motors and two main shafts running, this is new type construction in this field, drive the seam machine.

Working diameter: 200-700mm

Hydraulic pump motor: 4kw

Main motor: 11kw

With air brake device

10) Leakage testing for the drums                   Leakage testing machine  1set

Horizontal type test, air press 0.03Mpa. Manual spray the soap water, manual test the leakage.

Hydraulic motor: 3kw

Working diameter: 200-700mm

11) Finished  steel oil drum/ barrel